Features

It is an enamelled wire with high mechanical, thermal and chemical properties.
Structurally, the wire consists of a POLYESTER or POLYESTER-IMIDE base varnish and a POLYAMIDE-IMIDE top layer. Each layer of varnish gives the final wire excellent properties for the industry.

Mechanically, its stand-out features are its excellent resistance to abrasion, flexibility (meaning it is capable of withstanding demanding deformations, stretching and crushing in final processes), and low friction coefficient, which allows the wire to be worked on at high winding speed without damaging the insulating layer. Thermally, the wire is capable of withstanding high working temperatures and occasional overloads.

Chemically, the wire is compatible with most commercial impregnation resins and oils, coolants and cleaning fluids.

Despite being a complete wire, there may be applications that require a specific improvement, which is why we have a qualified technical team to study specific cases and prepare a project tailored to any need.

   ROUND-AL-C200 PLUS (Image)
Standards
  
Grades

IEC / DIN EN 60317-25
NEMA MW36-A
UL E93551

  

1-2

Technical Specifications

Parameter Unit Valor
Section - Round
Material - Aluminium
Standard - IEC-60317-25 MW36-A
UL Certificate - E93551
Thermal class - 220
Enamel polymer - PEI+PAI
Grades - 1-2
Diameters mm 0,236-6,00

Parameter Unit Point IEC Test conditions IEC value Obtained values (Ø3,35mm)
Conductor diameter mm 4.1 - 3,514 - 3,586 or within the range defined by customer
Overall diameter mm 4.3 - 3,636 - 3,679 or within the range defined by customer
Elongation % 6 - 15 20
Springiness grades 7.1 - Not applicable -
Flexibility and adherence - 8 - 15% Ø6,70mm
Resistance to abrasion N 11 - 9.3 -
Sliding force gr - - - -
Peel test turns 8 - - -

Parameter Unit Point IEC Test conditions IEC value Obtained values (Ø3,35mm)
Breakdown voltage V 13.2 Steel ball bath 2500 4000
Electrical Conductivity MS/m 5 - 35,5 - 36,2 ≥35,85
Continuity of insulation Faults 14 - - -

Parameter Unit Point IEC Test conditions IEC value Obtained values (Ø3,35mm)
Temperature index °C 15 - 200 -
Dielectric dissipation factor (tg δ) °C - - - 200 
Cut-though °C 10 - - -
Heat shock - 9 220º 30min 15% Ok

Parameter Unit Point IEC Test conditions IEC value Obtained values (Ø3,35mm)
Solderability °C 17 - Not applicable Not applicable
Resistance to transformer oil - 20  - - Yes
Resistance to refrigerants -  16  - - Yes
Resistance to solvents -  - - >H 4H
Heat bonding - - - - -

[1] Due to the variety of individual applications, we cannot make any generally binding commitments regarding compatibility. We recommend testing compatibility with the materials used. 

Spool
(Type) Nominal weight
K 200 10 Kg
K 250 20kg
K 355 45kg
K 500 90kg-30kg
K630 180kg-60kg
K 710 180kg-60kg
A 250/400 45kg-15kg
A 315/500 90kg-30kg
A 400/630 180kg-60kg
A 500/800 360kg-120kg

Download product data sheet

Download Product Sheet (PDF)

Articles connexes