![[Hero] ROUND-CU-SH180(Image)](/images/p/product-ederfil-becker.jpg)
FeaturesThe main feature of this class H wire is the ability to weld the end at tin bath temperatures from 375°C, without the need to mechanically remove the varnish layer. Structurally it consists of a single POLYURETHANE varnish.
It is compatible with commercial encapsulation and impregnation systems, although chemical resistance is limited, meaning compatibility testing is recommended for confirmation. |
![ROUND-CU-SH180 [Product Image]](/images/p/product-copper-ederfil-becker.jpg) |
|
Standards |
Grades |
|
|
IEC / DIN EN 60317-51 |
1-2 |
|
Technical Specifications |
||
![ROUND-CU-SH180 [Structure]](/images/p/enamelled-wire-structure-ederfilbecker-en.jpg)
| Parameter | Unit | Value |
|---|---|---|
| Section | - | Round |
| Material | - | Copper |
| Standard | - | IEC-60317-51 MW82-C |
| UL Certificate | - | E93551 |
| Thermal class | - | 180 |
| Enamel polymer | - | PU |
| Grades | - | 1-2 |
| Diameters | mm | 0,10-2,00 |
| Parameter | Unit | Point IEC | Test conditions | IEC value | Obtained values (Ø0,236mm) |
|---|---|---|---|---|---|
| Conductor diameter | mm | 4.1 | - | 0,232 - 0,240 | or within the range defined by customer |
| Overall diameter | mm | 4.3 | - | 0,253 - 0,267 | or within the range defined by customer |
| Elongation | % | 6 | - | 25 | 32 |
| Springiness | grades | 7.1 | - | 49 | 46 |
| Flexibility and adherence | - | 8 | - | 1xØ | 10% 1xØ |
| Resistance to abrasion | N | 11 | - | - | - |
| Sliding force | gr | - | - | - | 210gr |
| Peel test | turns | 8 | - | - | - |
| Parameter | Unit | Point IEC | Test conditions | IEC value | Obtained values (Ø0,236mm) |
|---|---|---|---|---|---|
| Breakdown voltage | V | 13.2 | - | 2100 | 5000 |
| Electrical Conductivity | MS/m | 5 | - | ≥58 | - |
| Continuity of insulation | Faults | 14 | 30m 500V 6µA | 25 | 0F |
| Parameter | Unit | Point IEC | Test conditions | IEC value | Obtained values (Ø0,236mm) |
|---|---|---|---|---|---|
| Temperature index | °C | 15 | - | 180 | - |
| Dielectric dissipation factor (tg δ) | °C | - | - | - | 180 |
| Cut-though | °C | 10 | 230ºC 1 min. heating + 2 con 2,20 N | OK | OK |
| Heat shock | - | 9 | 200º 30min | Ø 0.400 | Ø 0.236 |
| Parameter | Unit | Point IEC | Test conditions | IEC value | Obtained values (Ø0,236mm) |
|---|---|---|---|---|---|
| Solderability | °C | 17 | 390ºC | <2seg | 375ºC <1seg |
| Resistance to transformer oil | - | 20 | - | - | No |
| Resistance to refrigerants | - | 16 | - | - | No |
| Resistance to solvents | - | - | - | >H | 3H |
| Heat bonding | - | - | - | - | - |
[1] Due to the variety of individual applications, we cannot make any generally binding commitments regarding compatibility. We recommend testing compatibility with the materials used.
Spool |
|
|---|---|
| (Type) | Nominal weight |
| K 200 | 10 Kg |
| K 250 | 20kg |
| K 355 | 45kg |
| BICO200 | 10kg |
| A 250/400 | 45kg-15kg |
| A 315/500 | 90kg-30kg |
| A 400/630 | 180kg-60kg |
Download product data sheet |